Lever Limit Switch Supplier

The MK Power & Control & Control Lever Limit Switch supplier in Kolkata, West Bengal, Bihar, Odisha, Jharkhand, Chhattisgarh is generally closed and turns off power to halt the motor of the specific motion. A Lever-Type Limit Switch prohibits a traverser from moving beyond a specified position. They find application in material handling systems, lifts, and waggon shunting devices. 

A Lever Limit Switch is activated when the lever reaches a predefined position and passes over a projecting part on the girder. When the lever returns to the zero position, the Lever Limit Switch contacts are automatically reset owing to spring action. With a vision to carve a distinct niche in the market, we are involved in supplying Lever Limit Switch. 

Its contacts are automatically reset in case, the lever returns to zero position owing to action of its springs. Offered product is widely used for wagon shunting devices and E.O.T. Crane in order to prevent over traversing or traveling on control and power circuit up to 40 amps current rating and 500 volts A.C. 50 cycles/second. Our Lever Limit Switch is demanded by customers for its robust construction, durability and quality in accordance with industry laid norms.

Our high quality Lever Limit Switches are engineered with the use of topmost quality raw materials, quality tested components and innovative technology. These are highly praised by our customers for its sturdy construction, robust design, optimum performance & very low maintenance. We are one of leading Lever Limit Switch supplier in Kolkata, West Bengal, Bihar, Odisha, Jharkhand, Chhattisgarh.

As a prospering business, we are eager to provide our valued customers with an amazing quality assortment of Lever Limit Switch. Our highly skilled workers produce this switch using high-quality raw materials that meet industry standards. This switch is widely used for heavy-duty E.O.T. cranes and waggon shunting devices. Furthermore, this Lever Limit Switch is available in a variety of customised configurations to satisfy our clients’ unique needs at affordable pricing.

Features:

• The lever Limit switchoperates when its lever reaches its pre-determined position and the lever is moved over a projecting member fixed on the Girder.
• The Limit Switch contacts are automatically reset when the lever returns to zero position due to spring action.
• The Lever Limit Switch is made in IP-41 as well as in IP-54 enclosure.
• In case of IP 41 enclosure the housing is made from suitably reinforced sheet steel where as in case of IP-54, the cover is of Cast Aluminum. Also in this case the base and cover have machined surface to protect the Limit Switch against dust.
• The cam shaft on which the cams are fitted is mounted in the housing on moulded bushes of synthetic material which are fixed to the front and rear walls by means of screws.
• The Cams which are fitted on the cam shaft are moulded from the highest quality synthetic material and are accurately cut to correspond to the switching sequence desired.
• The contacts have a maximum continuous Current capacity of 40 amps AC.
• The contact tips are made of high grade Silver Cadmium Oxide alloy.
• When used for Series operation [ up to 40 Amps maximum], the Contacts are suitable for 720 operations per hour and in case of Shunt operation [ for Control Circuit], the Contacts are suitable for 1200 operation per hour.
• The same Contacts can be used in Series as well as in Shunt configurations
• The switching capacity of the Contacts when used for Shunt operation is 15 amps at 400 Volts, AC on highly inductive load and 2.5 amps at 220 Volts DC.
• These switching capacities in fact are far in excess of what is actually required in practise and hence replacement of Contacts for Shunt may not be necessary for a long time.
• The body of the Contacts is made of high grade Melamine which is specifically suited for heavy duty operation. The material is non – tracking and is capable of withstanding heavy arcing.